軟體王

xyz

會員登錄
您現在的位置:網站首頁 >> 程式軟體光碟 >> 網路工具網站優化 >> 碟片詳情
商品編號:
LAN1469
商品名稱:
cFosSpeed v6.50 Build 1810 Final
語系版本:
繁體中文/簡體中文/英文正式版
商品類型:
依附在現有網路連線上的網路驅動程式軟體
運行平台:
WindowsXP/Vista/7
更新日期:
2011-03-24
碟片數量:
1片
銷售價格:
100
瀏覽次數:
17379
熱門標籤:

轉載TXT文檔】  
您可能感興趣: Max 
cFosSpeed v6.50 Build 1810 Final
cFosSpeed v6.50 Build 1810 Final 繁體中文/簡體中文/英文正式版(依附在現有網路連線上的網路驅動程式軟體)

破解說明:
破解檔放置於CRACK夾內,請執行破解檔即可破解(請一定要照做,不然無法使用)
內容說明:
cFosSpeed是一個可以依附在現有網路連線上的網路驅動程式。安裝它之後,它將以
Taffic Shaping最佳化您的資料傳輸。
Traffic Shaping是一種最佳化網際網路資料流量的方法。它讓您在使用您最大的速度時
,同時享有最低的 Ping值。
cFosSpeed可以和路由器及(或者是) DSL資料機或 cable資料機並用;此外您也可以將
cFosSpeed和其他類型的網際網路連線並用。
cFosSpeed支援多種連線,像是 DSL、 cable、 ISDN、 UMTS, WIMax……等等。
cFosSpeed有兩個目標
維持低網路延遲(ping時間),以使得網路套用程式能儘快地反應。

藉由避免網路壅塞,以增進資料的處理能力。
您可以將 cFosSpeed用在您個人專屬的線路上,或者也可用在一條和別人共用的連線上
。 (共用軟體)

引用:
cFosSpeed 6.50 build 1810 -- 9-Feb-2011

* cFosSpeed now features packet loss avoidance. Some Internet connections
have a very small packet buffer for incoming data. This buffer is quickly
overrun when too much data is received, leading to packet loss. The
packet
loss is then detected by the sending TCP and the rate of transmission is
lowered. Nevertheless, this leads to higher ping times and packet loss
for all data received, even UDP data used for Gaming or VoIP. Tests show
that the packet loss rate can be as high as 5%.

Now cFosSpeed detects this packet loss in TCP streams and keeps the
streams
from sending too much data. This avoids packet loss, leading to much
lower
loss rates, fewer SACKs and sometimes much better throughput.

The feature is on by default, but can be switched off by setting
"spd gset avoid_loss 0 -save" or switching off "Packet loss avoidance"
under
Options, Settings, Preferences.

* New parameters to set the desired ping delays in both directions: tx_
delay,
tx_width, rx_delay and rx_width. cFosSpeed tries to keep the ping between
tx_delay and tx_delay + tx_width when sending and between rx_delay and
rx_delay + rx_width when receiving. The values are in usec. Removed
variable dest_width.

Added delay_auto setting, true by default. If set, it will automatically
set rx_delay and rx_width to sensible values. If you want your own values
in rx_delay and rx_width, you just assign some value to them or switch off
delay_auto.

+ Rx-shaping is now more precise. It limits sending streams quicker to
a proper speed.

+ Tx-shaping has now a better average ping time, since cFosSpeed doesn't
try to
increase the send speed so often, much less so in low latency mode. This
lowers average ping time by about 8 msec in pure upload tests here.

+ Added Bulgarian language. That makes a total of 29 languages supported.
Even more languages are downloadable from our web site, here:
http://www.cfos.de/speed/documentation/lang.htm

+ Increased installation speed.

+ Even if "Automatic MSS (MTU) optimization" is off (default), a set mss_
limit
and the intrinsic limit of the medium (like 1492 for PPPoE) will be used
to
change the MSS. Therefore, it's good to set the medium properly. Plus,
it helps rx-shaping.

+ Classes can now have -tos switch set to set TOS byte on all outgoing
packets. Since TOS and DSCP both are stored in the same byte, they are
incompatible to one another: you can not use both at the same time.

+ Added dumping of TOS values for "spd dump ...".

+ Added "spd vari" command to show variance sample data. It accepts
parameters
-clean to force cleaning of old values, -clear to clear all values and -
set
to force use of the calculated variance.

+ Added SACK statistics in "spd netstat" and "spd perf on" output.

+ Added "nsclear" command to clear the "netstat" counters.

+ Added filter expressions -l, -r, -l-mynet, -r-mynet, -l-bcast, -r-bcast,
-l-iplist and -r-iplist. They work like the -s and -d, etc. pendants,
just
for local and remote addresses, i.e. invariant of the direction of
traffic.

+ Added gset variable "Max_hops" (default 8) to allow cFosSpeed to ping with
higher TTLs. Allowed TTL values are 8 - 16. If you change it, you should
use "spd pingboot" afterwards. Thanks to gj090879 for inspiration.

+ Added global variable "vari_trace". When switched off new variance data
is
no longer dumped to trace.txt; that is the default now.

+ Added information about cFosSpeed ports to "Options", "Settings",
"Adapter Info" dialog.

x Fixed a bug in RWIN calculation of rx-shaping. Fixed another bug in rx_
limit
code and other fixes in rx-shaping.

x Fixed a serious bug that affected TCP volume counting of sent traffic.
Thanks to Toxic for his trace.

x Setting a new iplist name under preferences didn't read the IPlist into
memory right away, but only on the next start. Fixed. Thanks to
Laurentius
W?ckowski for bug report.

You can list all loaded IPlists with the command "spd showiplists".

x Fixed a problem where variance would not be properly calculated after
pinger
was changed. Thanks to Gothico for the trace.

x Fixed another bug that affected volume counting when net_talk was enabled,
but no other user was using cFosSpeed.

x Fixed bug in medium settings for media cable, frame_count, cable_mixed,
3g.

x Fixed a problem where cFosSpeed could cause too much delay in tx
direction.

x "spd set ..." settings made on the command line would be lost if changes
were
made in the HTA applets afterwards. Fixed. Thanks to Toxic for his
tests.

x Fixed a problem where Maxtxraw might become too large. Thanks to
Toxic for the trace.

x Setting msslimit to 536 with medium PPPoE had no effect. Fixed.

x Removed the additional up to 4 pings per second; it's again sending only 2
pings per second.

x Fixed a freeze with WLAN cards. Thanks to Stefan Goerick for his dump.

x Switching an adapter On/Off didn't bind/unbind it immediately. Fixed.

x The TCP MSS will no longer be lowered if the medium "adaptive" is set. If
you know the type of your connection, set it properly under Options,
Settings, Traffic Shaping, , Options. If you have some DSL variant
cFosSpeed might reduce the TCP MSS on your connections to gain up to 3%
speed if "Automatic MSS (MTU) optimization" is switched on.

x Fixed some erroneous UTF-8 BOMs in settings.ini.

x Fixed a problem where data would sometimes not be written properly to
data.ini. Thanks to AndyC for his case.

- Thanks for the help of bandbreite, Shaori, noname, Toxic, Pinhead, Schimi
相關商品:
  • cFosSpeed v6.00 Build 1700 Final 繁/簡體中/英文正式版(多功能DSL modem和路由器驅動網路工具軟體)
  • cFosSpeed v5.10 Build 1619 Final x86 繁體中文/英文正式版(充分使用你的ISDN和DSL連接軟體)
  • cFosSpeed v8.02 Build 1972 Final 繁體中文正式版(網路速度工具軟體)
  • cFosSpeed v6.10 Build 1774 Final (x86-64) 繁體中文/簡體中文/英文正式版(種最佳化網際網路流量的方法軟體)
  • Opera v10.52 Build 3370 - Final 繁體中文正式版(強大的功能來瀏覽網路軟體)
  • cFosSpeed v10.08 Build 2216 x32/x64 多國語言/繁體中文版(網路加速軟體)
  • Opera v9.62 Build 10467 - Final 繁體中文正式版(瀏覽器類軟體)


  • 購物清單